第 1 頁 (共 1 頁)
Re: uoa一問
發表於 : 週六 9月 05, 2009 2:46 am
由 狂～～～II
簡單的說...就是你UOA版本跟UO版本不符合...
有 取消UO視窗 這個動作時請確定你的UO版本還正不正確~
等等我會開一篇防止UO更新動作的方法...
然後UOA要變成中文的話資料夾中要有UOAssist.cht 這個檔案
等等我開的那篇會提供UOA正確版本跟UOA不會更新的檔案
請等等參照那邊 有問題才發問吧~
Re: uoa一問
發表於 : 週五 9月 04, 2009 5:05 pm
由 nuonellyoun
請問為什麼我的UOA裝起來是英文的@@?
(在下載的過程有點setting選中文)
而且下載的檔案數都是0 最後安裝好取消UO視窗準備覆蓋檔案的時候還會出現UOpatch錯誤的視窗
請問是哪裡出問題@@?
發表於 : 週二 3月 29, 2005 10:33 pm
由 troysky
balyss 寫:跟我的情形一樣輸入註冊碼也沒用
進入uo後沒seed的值有註冊碼也沒用
昨天花了幾個小時上網去英文站查
好像是client版本的問題
只是說明全是英文@@"
以下是解決安裝問題的全文
Step 1.....
UOAssist.exe
Let it patch all the way, it will then launch your client as usual, Just close it.
Step2.....
Click the start menu > run.
in run type "regedit" and click ok (note: don't type in the " ", just: regedit)
Click the "+" beside "HKEY_CURRENT_USER" then click the "+" beside "Software", scroll down
until you find the "tugsoft" key (the key looks like a folder) Select the key and delete it.
Step 3.....
Replace your uoa files (C:\program files\UOAssist\) with the ones in this zip file.
atolsuoassist.zip
Then replace the updateace.dll file (also in your uoassit dir) with this one
uoa-anti-updater.zip
Run UOA now, login to your account & player, so that uoa runs like normal.
Then close uo. Go back into regedit (step 2) and delete the tugsoft key.
Once deleted move on to step 4.
Step 4.....
Download and run this. (uoa.reg)
uoareg.zip
Doing all this "should" get uoa working. If it doesn't, oh well you tried.
Also, forgot to mention this.
To get full version uoa working enter this serial:
(it should already have a serial number installed when you turn uoassist on if not use this one)
tN2qD8,$MEd8,=je,4XrG,V}}9d,2fK]j,[Tu~,TXYK,+r
ALSO?????
If you want to get uo to stop running patch when you start uoassist copy this zip file over the
uopatch.exe in your uo folder...
**( remember to back up your uopatch.exe first before coping over it )**
uopatch.zip
是可行的我裝成功了
請問上述檔案哪裡找??
發表於 : 週四 2月 03, 2005 5:16 pm
由 kaoalan
balyss 寫:跟我的情形一樣輸入註冊碼也沒用
進入uo後沒seed的值有註冊碼也沒用
昨天花了幾個小時上網去英文站查
好像是client版本的問題
只是說明全是英文@@"
以下是解決安裝問題的全文
Step 1.....
UOAssist.exe
Let it patch all the way, it will then launch your client as usual, Just close it.
Step2.....
Click the start menu > run.
in run type "regedit" and click ok (note: don't type in the " ", just: regedit)
Click the "+" beside "HKEY_CURRENT_USER" then click the "+" beside "Software", scroll down
until you find the "tugsoft" key (the key looks like a folder) Select the key and delete it.
Step 3.....
Replace your uoa files (C:\program files\UOAssist\) with the ones in this zip file.
atolsuoassist.zip
Then replace the updateace.dll file (also in your uoassit dir) with this one
uoa-anti-updater.zip
Run UOA now, login to your account & player, so that uoa runs like normal.
Then close uo. Go back into regedit (step 2) and delete the tugsoft key.
Once deleted move on to step 4.
Step 4.....
Download and run this. (uoa.reg)
uoareg.zip
Doing all this "should" get uoa working. If it doesn't, oh well you tried.
Also, forgot to mention this.
To get full version uoa working enter this serial:
(it should already have a serial number installed when you turn uoassist on if not use this one)
tN2qD8,$MEd8,=je,4XrG,V}}9d,2fK]j,[Tu~,TXYK,+r
ALSO?????
If you want to get uo to stop running patch when you start uoassist copy this zip file over the
uopatch.exe in your uo folder...
**( remember to back up your uopatch.exe first before coping over it )**
uopatch.zip
是可行的我裝成功了
不好意思......可以幫忙翻譯一下嘛..謝謝
發表於 : 週四 2月 26, 2004 10:16 am
由 keanII
謝兩位ㄉ指點
發表於 : 週三 2月 25, 2004 5:36 pm
由 balyss
跟我的情形一樣輸入註冊碼也沒用
進入uo後沒seed的值有註冊碼也沒用
昨天花了幾個小時上網去英文站查
好像是client版本的問題
只是說明全是英文@@"
以下是解決安裝問題的全文
Step 1.....
UOAssist.exe
Let it patch all the way, it will then launch your client as usual, Just close it.
Step2.....
Click the start menu > run.
in run type "regedit" and click ok (note: don't type in the " ", just: regedit)
Click the "+" beside "HKEY_CURRENT_USER" then click the "+" beside "Software", scroll down
until you find the "tugsoft" key (the key looks like a folder) Select the key and delete it.
Step 3.....
Replace your uoa files (C:\program files\UOAssist\) with the ones in this zip file.
atolsuoassist.zip
Then replace the updateace.dll file (also in your uoassit dir) with this one
uoa-anti-updater.zip
Run UOA now, login to your account & player, so that uoa runs like normal.
Then close uo. Go back into regedit (step 2) and delete the tugsoft key.
Once deleted move on to step 4.
Step 4.....
Download and run this. (uoa.reg)
uoareg.zip
Doing all this "should" get uoa working. If it doesn't, oh well you tried.
Also, forgot to mention this.
To get full version uoa working enter this serial:
(it should already have a serial number installed when you turn uoassist on if not use this one)
tN2qD8,$MEd8,=je,4XrG,V}}9d,2fK]j,[Tu~,TXYK,+r
ALSO?????
If you want to get uo to stop running patch when you start uoassist copy this zip file over the
uopatch.exe in your uo folder...
**( remember to back up your uopatch.exe first before coping over it )**
uopatch.zip
是可行的我裝成功了
Re: uoa一問
發表於 : 週三 2月 25, 2004 9:37 am
由 jeff_cheng1260
keanII 寫:為何我都已經登入腳色裡面ㄌ
用設uoa它下面還跟我說!要執行功能必須先登記一個腳色勒?
應該是你的KEY 沒輸入進去吧
到UOA 主選單向下...左下角有個問號 ...點一下
左下方有個註冊碼 請輸入
tN2qD8,$MEd8,=je,4XrG,V}}9d,2fK]j,[Tu~,TXYK,+r
應該就行了
uoa一問
發表於 : 週五 2月 20, 2004 10:59 am
由 keanII
為何我都已經登入腳色裡面ㄌ
用設uoa它下面還跟我說!要執行功能必須先登記一個腳色勒?